Fluorine resin coatingのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Fluorine resin coating(sus) - メーカー・企業と業務用製品 | イプロスものづくり

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Fluorine resin coatingの製品一覧

1～30 件を表示 ／ 全 39 件

表示件数
Case studies on solving issues with anti-static fluororesin coatings.

Case studies on solving issues with anti-static fluororesin coatings.

A coating that prevents static electricity! It can be used safely without the risk of explosion.

The "EC Series" is a fluororesin baked coating/lining that prevents static electricity accumulation. Since it does not accumulate static electricity, there is no risk of explosion, making it recommended for companies concerned about risks such as explosions due to static electricity. In ink manufacturing companies, incidents of ignition due to general fluororesin coatings had occurred, but the introduction of this product has ensured the safety of workers and significantly reduced the amount of cleaning solvents used. Additionally, we will introduce case studies of problem-solving adopted by pharmaceutical manufacturers and chemical manufacturers. [Examples of Implementation] ■ Ink Manufacturing Company - Equipment: Oil-based paint manufacturing equipment - Equipment specifications at the time of the problem: Stainless steel (SUS304) + buffed - Issues: Difficulties in color change cleaning, ignition incidents due to general fluororesin coatings - Effects: Simplification of cleaning (significant reduction in cleaning solvent usage) Ensured safety for workers *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Dipper

[Case Study] Dipper

Significantly contributes to reducing cleaning time! Introducing a case where "Toshical S TS-1310" was coated.

At this adhesive film manufacturer, they use a SUS ladle to portion out adhesive from an acrylic adhesive storage tank. Until now, adhesive had been adhering to the surface of the ladle, making it time-consuming to clean with organic solvents. They consulted with us and adopted "Toshical S TS-1310." After coating, there was no longer any adhesion of the acrylic adhesive, significantly contributing to a reduction in cleaning time. 【Overview】 ■ Customer: Adhesive film manufacturer ■ Target: Acrylic adhesive usage process ■ Application: Toshical S TS-1310 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating/ETFE "USL Crucible Scissors"

Fluororesin coating/ETFE "USL Crucible Scissors"

Electrostatic powder coating with thermoplastic fluororesin.

Fluororesin Coating/ETFE "USL Crucible Scissors" have been electrostatically powder coated with thermoplastic fluororesin. Universal Co., Ltd. continues to provide fluororesin products that can meet the demands of highly clean environments, cleanroom products that meet high cleanliness levels, and static electricity countermeasure products. 【Specifications】 [Code Number / Total Length (mm)] ○002-032-01 / 240 ○002-032-02 / 300 ○002-032-03 / 360 ○002-032-04 / 450 For more details, please contact us or download the catalog.

  • Other work tools
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating/ETFE "USL Tong"

Fluororesin coating/ETFE "USL Tong"

Electrostatic powder coating with thermoplastic fluororesin. Operating temperature: MAX 180°C.

Fluororesin Coating/ETFE "USL Tong" has been electrostatically powder coated with thermoplastic fluororesin. The maximum operating temperature is 180°C. Universal Co., Ltd. continues to provide fluororesin products that can meet the demands of highly clean environments, cleanroom products that meet high cleanliness levels, and electrostatic countermeasure products. 【Specifications】 ○ Code Number: 002-033-01 ○ Total Length (mm): 220 ○ Material: SUS 304 For more details, please contact us or download the catalog.

  • Other work tools
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Roller Conveyor

[Case Study] Roller Conveyor

We will introduce an example of applying ToshiCal S coating to guide rollers for diaper production.

The paper diaper manufacturer was struggling with transportation issues caused by hot melt adhesive that overflowed during the production process and interfered with the rollers. They consulted with us and adopted "Toshical S TS-1800." After coating, the adhesive issues caused by the hot melt adhesive were eliminated, significantly contributing to improvements in productivity and yield. 【Overview】 ■ Customer: Paper diaper manufacturer ■ Target: Transportation process using roller conveyor ■ Implementation: Toshical S TS-1800 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Problem Solving Case] Radiator Cap Component (Negative Pressure Valve)

[Problem Solving Case] Radiator Cap Component (Negative Pressure Valve)

Introducing fluororesin coating for harsh operating environments where coolant fluid comes into direct contact!

We would like to introduce a case where we solved a problem by applying a fluororesin coating to the radiator cap component (negative pressure valve), which provided non-adhesive properties. The coolant liquid previously used, which contained a non-amine-based rust inhibitor, had issues such as damaging the main pressure valve (rubber) and causing the negative pressure valve (SUS) to seize. This led to the coolant liquid being unable to move between the reserve tank and the radiator during low temperatures, resulting in overheating and causing damage or rupture to the radiator. After hearing about these issues from the customer, our company selected the coating. We utilized the non-adhesive properties of the fluororesin to prevent the fixation of the main pressure valve and the negative pressure valve. 【Improvement Effects】 ■ The coating no longer peels off ■ Prevented seizing *For more details, please refer to the PDF document or feel free to contact us.

  • 画像サブｰラジエーター.png
  • Coating Agent
  • Rubber
  • stainless
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating, suitable for room temperature processing, 'Cerashield F'

Fluororesin coating, suitable for room temperature processing, 'Cerashield F'

Can be processed at room temperature without the need for heat treatment such as entering a firing furnace! Protects against acids and alkalis.

"Serashield F" is a coating made from a fluorine-based material that can be applied at room temperature and has excellent chemical resistance. By protecting equipment and jigs from acids, alkalis, and dirt, it extends the replacement period, improves cleaning and maintenance, and leads to cost reduction. It can be applied to various materials, including metals, PVC, PET, and polycarbonate, making it suitable for a wide range of substrates. 【Features】 ■ Can be applied to various substrate materials ■ Coating is possible not only for various metals but also for resins such as PVC, PET, and polycarbonate ■ Fluorine-based material that can be processed at room temperature ■ No need for heat treatment such as placing in a furnace *For more details, please refer to the PDF document or feel free to contact us.

  • IMG_1855_edited.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Multi-Nozzle

[Case Study] Multi-Nozzle

Greatly contributes to productivity and quality improvement! Introducing a case where multi-nozzles are coated with ToshiCal S coating!

At this semiconductor processing manufacturer, there was a problem with paste-like adhesive adhering to the side of the multi-nozzle pipe, causing variations in the application amount. They consulted with us and adopted "Toshical S TS-1310 (UNA310-X10)." After coating, it was found to be effective in preventing adhesion issues between the adhesive that overflowed during application and the side of the pipe, significantly contributing to improvements in productivity and quality. 【Overview】 ■ Customer: Semiconductor processing manufacturer ■ Target: Automatic adhesive application process ■ Implementation: Toshical S TS-1310 (formerly UNA310-X10) *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Packaging Machinery

[Case Study] Packaging Machinery

Greatly contributes to improved productivity! Introducing a case where a TOSICAL S coating was applied to the surface of the claws that grip adhesive tape.

At this rubber product manufacturer, there is a machine that uses acrylic adhesive tape for sealing during product packaging. This machine uses a component called a "claw" to grip and apply the adhesive tape. Until now, the adhesive tape would stick to the surface of the claw, making it impossible to apply it accurately. Therefore, they consulted with us and adopted "Toshical S TS-1800." After coating, the adhesion of the adhesive tape was eliminated, significantly contributing to improved productivity. 【Overview】 ■ Customer: Rubber product manufacturer ■ Target: Product packaging process ■ Implementation: Toshical S TS-1800 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Guide Roller

[Case Study] Guide Roller

Significant improvement in productivity! Introducing a case where "Toshical S TS-1800" was coated on the surface of the guide roller.

At this label manufacturer, after die-cutting the label seals, the unnecessary parts of the label seals are collected by a winding device. Until now, when being wound along the guide roller, the adhesive applied to the label seals would overflow onto the surface of the guide roller, causing adhesive issues. As a result, they consulted with us and adopted "Toshical S TS-1800." After coating the surface of the guide roller, the adhesive issues were eliminated, significantly improving productivity. [Overview] ■ Customer: Label Manufacturer ■ Target: Die-cutting process of label seals ■ Implementation: Toshical S TS-1800 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Automatic Labeling Machine

[Case Study] Automatic Labeling Machine

Significantly contributes to improving productivity and yield! Here is an example of coating the surface of a printing roller with "Toshical S UNA102CR".

At this beverage manufacturer, a labeler (automatic labeling machine) is used to apply product labels to beverage bottles. When attaching labels to the bottles, it seems that adhesive that overflowed from the labels was sticking to the stamping roller (the part where labeling is done), causing adhesive issues. As a result, they consulted with us and adopted "Toshical S UNA102CR." After coating, the adhesive adhesion has disappeared, significantly contributing to improvements in productivity and yield. 【Overview】 ■ Customer: Beverage manufacturer ■ Target: Labeling process ■ Implementation: Toshical S UNA102CR *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating minimizes deformation of the substrate during processing.

Fluororesin coating minimizes deformation of the substrate during processing.

The thin film fluoropolymer coating "10UNDER" is a revolutionary fluoropolymer coating that minimizes deformation of the substrate and can be processed.

■What is the "10under" Thin Film Fluoropolymer Coating? Conventional fluoropolymer coatings can be challenging to apply when dimensional stability of the substrate is a priority, particularly in terms of film thickness. Yoshida SKT has been working on development to meet these needs and has announced the "Thin Film Fluoropolymer Coating '10under.'" ■Features of 10under - Non-stick properties equivalent to standard fluoropolymer coatings - Capable of thin film processing of approximately 10μm, reducing dimensional changes - While being a thin film, it minimizes transparency *For more details, please download the materials or contact us.

  • 2_家比較全体.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Label and Sticker Processing Machinery

[Case Study] Label and Sticker Processing Machinery

Shortened collection time for cuttings! Here is an example of coating the inner surface of the dust box with "Toshical S TS-1800."

At this packaging equipment manufacturer, during the die-cutting process of labels and seals, unnecessary label and seal scraps are generated. These scraps are blown away by air and collected in the dust box attached to the die-cutting machine. However, the scraps tended to stick to the inner surface of the dust box, making cleaning labor-intensive. As a result, they consulted with us and adopted the "Toshical S TS-1800." After coating, the scraps no longer stuck, significantly reducing cleaning time and greatly contributing to productivity. [Overview] ■ Customer: Packaging equipment manufacturer ■ Target: Die-cutting process of labels and seals ■ Implementation: Toshical S TS-1800 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Cutter for Automatic Labeling Device

[Case Study] Cutter for Automatic Labeling Device

Significant effects on adhesion issues! Introducing a case where a tape cutter was treated with ToshiCal S coating.

At this can manufacturing company, juice can lids are produced, wrapped in kraft paper every 100 pieces, and sealed with acrylic adhesive tape. After that, the tape is cut with a specialized blade. In untreated cases, the adhesive material adhered to the blade, causing cutting defects. Therefore, they consulted with our company and adopted "Toshical S TS-1400." After coating, significant effects on adhesion issues were observed, greatly contributing to improvements in productivity, quality, and yield. 【Overview】 ■ Customer: Can manufacturing company ■ Target: Packaging process for juice can lids ■ Implementation: Toshical S TS-1400 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Corrosion prevention for stainless steel welds *Proven results in semiconductor processes (exhaust gas treatment equipment)

Corrosion prevention for stainless steel welds *Proven results in semiconductor processes (exhaust gas treatment equipment)

There is a coating track record with exhaust gas treatment equipment (pollution control equipment) used in semiconductor manufacturing! Coating that contributes to corrosion prevention of stainless steel welds!

Many of the gases used in semiconductor manufacturing have properties such as flammability, self-ignition, corrosiveness, and toxicity. Additionally, there are gases like PFCs with a high GWP (Global Warming Potential). Exhaust gas treatment systems (pollutant removal devices) play a crucial role in safely and reliably neutralizing these gases, while also ensuring substrate protection and safety. At Fluorocoat, we propose corrosion prevention measures through coating applications for the corrosion protection of SUS316L stainless steel welds. 【We can address the following issues】 ■ Intergranular corrosion ■ Stress corrosion cracking ■ Corrosion from heat-affected zones of welding ■ Cleaning after welding We have obtained ISO 9001 certification at all domestic factories, and our well-equipped facilities can handle difficult machining tasks. Additionally, we have established a comprehensive inspection system with advanced equipment, including evaluation testing machines compliant with JIS standards. *For more details, please download the PDF or contact us directly.

  • スクリーンショット 2025-06-16 152514.png
  • Surface treatment contract service
  • Coating Agent
  • Other surface treatment equipment
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] ACF Tape Application Jig

[Case Study] ACF Tape Application Jig

Prevent adhesive defects in advance! Introducing a case where a ToshiCal S coating was applied to an ACF tape attachment jig.

At this LSI manufacturer, they had been struggling with adhesive overflow from the thermosetting epoxy resin-based adhesive applied to tapes (ACF tapes) during the production of film substrates, which caused the adhesive to stick to the fixtures. Previously, they had adopted Teflon coating, but the adhesion issues were not resolved, and they were not satisfied with its effectiveness. Therefore, they consulted with us and adopted "Toshical S TS-1310." After coating, the adhesion issues were eliminated, significantly contributing to improvements in productivity, quality, and yield. 【Overview】 ■ Customer: LSI Manufacturer ■ Target: Semiconductor substrate manufacturing process ■ Implementation: Toshical S TS-1310 *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
We are introducing the effects of fluoropolymer coating in a video!

We are introducing the effects of fluoropolymer coating in a video!

In Fluorocoat, we have set up an official channel on YouTube to showcase the effects of fluoropolymer (Adron) coating through videos.

FloroCoat Corporation Video Channel https://www.youtube.com/channel/UCHo2ZUOzV0QPzdj-vHechAg offers the following video content: (1) Adron Coating Introduction Video Digest Version (3 minutes 45 seconds) (2) Adron Coating Introduction Video 1 - Slip Characteristics Introduction (1 minute 19 seconds) (3) Adron Coating Introduction Video 3 - Difficult Adhesion Characteristics Introduction (1 minute 35 seconds) (4) Adron Coating Introduction Video 4 - Slip Characteristics Introduction (1 minute 7 seconds) (5) Adron Coating Introduction Video 6 - Water Repellent Characteristics Introduction (1 minute 7 seconds) (6) Adron Coating Introduction Video 7 - Difficult Adhesion Characteristics Introduction (1 minute 39 seconds) Each video content clearly and easily introduces the effects that can be achieved by utilizing the properties of fluoropolymer coatings. Everyone, please take a look!

  • Other surface treatment equipment
  • Processing Contract
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Introduction of the development product: Thin film fluororesin coating 10under.

Introduction of the development product: Thin film fluororesin coating 10under.

This is a groundbreaking fluororesin coating that has made it possible to process thin films with a thickness of 10 μm, which was previously considered difficult to process.

■Development Background of Thin Film Fluororesin Coating "10under" Fluororesin coatings are sometimes requested to be processed in thin films of around 10μm when dimensional stability of the substrate is a priority. However, in the case of standard fluororesin coatings, a thickness of at least 20-50μm has been required to maintain good appearance and performance. Even so, when requests for thin film processing arise, we sometimes propose a "modified type" of fluororesin coating with a different coating structure. However, there were challenges with the modified type not being able to deliver the necessary functions. Yoshida SKT has worked on development to solve these challenges, resulting in the creation of the "Thin Film Fluororesin Coating '10under.'" ■Features of 10under - Non-stick properties equivalent to standard fluororesin coatings - Capable of processing thin films of around 10μm, reducing dimensional changes - While being a thin film, it suppresses transparency *For more details, please download the materials or contact us.*

  • 2_家比較全体.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Pharmaceutical Industry Surface Treatment Case] Achieving Automation of Transport Equipment in Sterile Rooms

[Pharmaceutical Industry Surface Treatment Case] Achieving Automation of Transport Equipment in Sterile Rooms

Solve the "clogging" of the eye drop resin bottle production line! Achieve reduced maintenance of transport equipment and automation of the clean room with fluorine coating!

This is a case of surface treatment for equipment that transports eye drop bottles arranged in a line, which are dispensed from a prescription. ■Problems to Solve Eye drop bottles were being transported in a manner where they were pushed out one after another over the transport chute. However, on the flat metal surface of the chute, the bottles tended to stick and were difficult to slide, leading to blockages and tipping during transport. ■Goals to Achieve Due to the need for minimal human traffic in the sterile room, it was necessary to use the equipment for at least six months without maintenance, and a surface treatment that improves sliding was requested. ■Background for Coating Selection While fluororesin coatings, which have excellent sliding properties, initially performed well, the surface would become polished due to friction with the bottles. Once worn down to a flat and smooth state, the sliding ability decreased, leading to issues. Additionally, a method was considered where the substrate would be pre-treated to form a rough surface before coating, thereby reducing the contact area. However, since different metals such as aluminum and stainless steel were used for the chute substrate, variations in hardness led to significant changes in surface roughness, and difficulties in processing arose depending on the material. ■Adopted Coating 'TP Coating' ▼ Click here for details on the coating!

  • 調整00000014_edited.jpg
  • 調整00000013_edited.jpg
  • Other conveying machines
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating "Wear resistance for coatings!"

Fluororesin coating "Wear resistance for coatings!"

For those who want to introduce fluoropolymer coatings but are concerned about wear and peeling of the coating. Measures against peeling and wear of fluoropolymer coatings!

■Are you facing any of these issues with surface treatment? - You are using fluororesin coating to improve product slip properties, but it wears out quickly and requires reprocessing. - You want to introduce fluororesin coating for production line improvement, but you are concerned about coating wear and peeling. "We have a coating at Yoshida SKT that can address such concerns." Bicoat® is a coating that pursues a balance of [durability and strength] and [anti-adhesion and slip effect]. It reduces the possibility of troubles caused by "functional decline due to coating scratches and peeling, foreign matter contamination, and defects," which can lead to decreased production efficiency. - Provides slip properties to conveyor chutes, preventing blockages of transported items. Reduces the risk of coating peeling and foreign matter contamination. - Prevents sticking of heat sealer's bonding film and coating peeling. - Contributes to improved release properties of resin molding molds. Maintains dimensional accuracy, allows for low-temperature processing, and preserves mold quality. 'Bicoat®' samples are currently available for free. Please try the anti-adhesion and slip properties with actual materials. ▼ You can apply from the official Yoshida SKT website below.

  • damageless11.jpg
  • s-IMG_8528_edited.jpg
  • s-NYF-11-S (2).jpg
  • s-NYK-01 (4).jpg
  • Other Auto Parts
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
"Bi-Coat" with durability that surpasses fluororesin coatings.

"Bi-Coat" with durability that surpasses fluororesin coatings.

For those troubled by peeling and wear of fluororesin coatings, we are currently offering free samples of 'Bicoat(R)', which excels in high hardness, wear resistance, release properties, and slip characteristics.

Do you have any concerns or requests regarding coatings for "preventing sticking" and "improving sliding"? - "Worried about coating deterioration or peeling" - "Want to extend the period until reprocessing" In production environments, there is always a demand for "damage-free" coatings. Bycoat® is a coating that pursues a balance of [durability and strength] and [anti-sticking and sliding effects]. [Purpose] To reduce the possibility of troubles such as "function degradation, foreign matter contamination, and defects caused by coating scratches and peeling," which can lead to decreased production efficiency. [Examples of Use] - Conveyance guides Provides sliding properties to prevent clogging of conveyed items. Reduces the risk of coating peeling and foreign matter contamination. - Heat seal type (sealer) Prevents sticking of the sealing member that presses the film with heat and coating peeling. - Molding type Contributes to improved release properties of resin product molds. Maintains dimensional accuracy, allows for low-temperature processing, and preserves mold quality. We are currently offering a free "Bycoat® Experience Kit." Please try the anti-sticking and sliding properties with actual materials. ▼ You can apply for the "Experience Kit" from the official Yoshida SKT website below.

  • damageless11.jpg
  • s-IMG_8528_edited.jpg
  • s-IMG_8557_edited.jpg
  • s-NYF-11-S.jpg
  • s-NYF-11-S (2).jpg
  • s-NYK-01 (3)1.jpg
  • s-NYK-01 (4).jpg
  • Other Auto Parts
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High durability fluoropolymer coating "Thermo Pro Release"

High durability fluoropolymer coating "Thermo Pro Release"

Fluororesin coating ideal for use in high-temperature environments, such as hot melt bonding and hot pressing.

Thermo Pro Release is a high-durability, high-release fluororesin coating originally developed by Nikken Coating Industry. It demonstrates excellent release properties and durability even in high-temperature environments above 200°C, preventing resin adhesion and thread pulling during thermal welding and thermal riveting processes. With our unique evaluation technology, we can propose the optimal coating specifications tailored to the customer's usage environment (temperature range, type of resin, etc.). It also excels in abrasion resistance and adhesion, lasting longer than conventional fluororesin coatings. This reduces the effort required for mold cleaning and maintenance, contributing to improved production efficiency and reduced maintenance costs!

  • DSC_5749.jpg
  • DSC_7001.jpg
  • DSC_6966.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Risk of deformation caused by fluororesin and PEEK coating on thin plate products.

Risk of deformation caused by fluororesin and PEEK coating on thin plate products.

Explanation of measures against warping, distortion, and chipping caused by heat and blasting during fluororesin coating and PEEK coating.

In fluoropolymer coatings and PEEK coatings, substrate preparation is performed through high-temperature firing and sandblasting, which may cause deformation or damage in thin plates, thin-walled parts, and blade shapes. In particular, products with thin thickness or parts with edge sections are susceptible to the effects of thermal expansion and mechanical stress from blasting, which can lead to issues such as warping, distortion, dimensional changes, and chipping of cutting edges. When requesting fluoropolymer or PEEK coatings, we confirm the product shape, thickness, and material in advance, optimizing blasting and firing conditions. We propose processing specifications that take into account the risks of deformation and damage. If you are considering coatings for precision sheet metal parts or cutting tool components, please feel free to consult with us.

  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
NIPPON FUSSO (THAILAND) CO.,LTD.

NIPPON FUSSO (THAILAND) CO.,LTD.

Supporting Japanese companies in the ASEAN region with surface treatment!

Nippon Fluorine Industry Co., Ltd. has established a local subsidiary in Thailand. We have installed one of the world's largest large-scale kilns, enabling us to handle large substrates as well. We offer fluororesin coatings and linings of the same quality as in Japan. We also have Japanese staff stationed here, so if you have any surface treatment issues not only in Thailand but also in the ASEAN region, please feel free to contact us.

  • Surface treatment contract service
  • Processing Contract
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating 'The trump card for lightweighting Fluorocoat'

Fluororesin coating 'The trump card for lightweighting Fluorocoat'

Proposing challenges and solutions for the adoption of Mg alloys (magnesium alloys)!

In the fluorocoat, we propose challenges and solutions for the adoption of Mg alloy (magnesium alloy) as a trump card for weight reduction. Mg alloy (magnesium alloy) has issues such as susceptibility to corrosion, galvanic corrosion, and oxidation, but by applying a coating, it can be protected from chemicals, prevent galvanic corrosion as an insulator, and also prevent oxidation. This could significantly reduce the weight of vehicles. We also have case studies and achievements related to spray guns. ■ Advantages of Mg alloy (magnesium alloy) - The lightest among practical metals (specific gravity = aluminum 2/3, iron 1/4) - Higher specific strength than Al and iron - Maximum vibration absorption - Abundant resources (the last super metal on Earth) * For more details, please refer to the PDF materials or feel free to contact us.

  • Coating Agent
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Introduction to Thin Film Fluorine Coating 10under

Introduction to Thin Film Fluorine Coating 10under

This is a groundbreaking fluorine coating that has made it possible to process thin films with a thickness of 10μm, which was previously considered difficult to process.

■10under Development Background Fluororesin coatings are sometimes requested for processing in thin films of around 10μm, especially when dimensional stability of the substrate is a priority. However, in the case of standard fluororesin coatings, a thickness of at least 20-50μm is required to maintain good appearance and performance. Even so, when requests for thin film processing arise, we sometimes propose a "modified type" of fluororesin coating that alters the coating structure. However, there were challenges with the modified type not being able to deliver the required functions. Yoshida SKT has worked on developing a solution to these challenges, resulting in the creation of “10under.” ■Features of 10under - Non-stick properties equivalent to standard fluororesin coatings - Capable of processing thin films of around 10μm, reducing dimensional changes - While being a thin film, it suppresses transparency *For more details, please download the materials or contact us.*

  • 2_家比較全体.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
New Possibilities of Thin Film Fluororesin Coating '10under'

New Possibilities of Thin Film Fluororesin Coating '10under'

A groundbreaking thin-film fluororesin coating that achieves thin-film technology while maintaining the performance of fluororesin coatings!

The 10under thin film fluoropolymer coating possesses non-stick properties equivalent to standard fluoropolymer coatings while being processable at a thickness of approximately 10μm. As a result, the dimensional changes due to film thickness are reduced compared to the standard type. Additionally, despite being a thin film, it minimizes transparency and prevents aesthetic defects. When compared to other fluoropolymer coating products, it is generally considered that a thickness of at least 20-50μm is required to maintain good appearance and performance. Therefore, when requesting processing with a thin film like 10under, it was common to propose a "modified type" fluoropolymer coating; however, there are challenges where the modified type may not exhibit the necessary functions. 10under addresses such challenges and is capable of demonstrating high performance while being a thin film. For specific comparisons and detailed information, please check the link.

  • 2_家比較全体.jpg
  • Surface treatment contract service
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Introducing the effects of fluoropolymer coating for kitchens in a video!

Introducing the effects of fluoropolymer coating for kitchens in a video!

On the official YouTube channel, we introduce the effects of fluoropolymer coating in a video!

In the kitchen industry, there is a demand for reducing the burden of daily cleaning. In particular, grease stains and food sticking require considerable time and effort to clean, which can decrease work efficiency. Fluoropolymer coatings help suppress the adherence of these stains and improve cleanability, contributing to hygiene management and increased efficiency in the kitchen. 【Usage Scenarios】 - Kitchen equipment (frying pans, pots, etc.) - Cooking surfaces - Food processing trays 【Benefits of Implementation】 - Stains are less likely to adhere and easier to remove - Reduced cleaning time - Maintenance of a hygienic environment

  • Other surface treatment equipment
  • Processing Contract
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Effects of Fluororesin Coating for Semiconductors

Effects of Fluororesin Coating for Semiconductors

Introducing the effects of fluoropolymer coating in a YouTube video!

In the semiconductor industry, resistance to chemicals in the manufacturing process is required. In particular, high durability against chemical solutions is essential for maintaining product quality. Inadequate coatings can lead to corrosion of components and performance degradation. Our fluoropolymer coatings excel in chemical resistance and contribute to the protection of materials in the semiconductor manufacturing process. 【Application Scenarios】 - Semiconductor manufacturing equipment - Protection of components in environments using chemical solutions 【Benefits of Implementation】 - Improved chemical resistance - Extended product lifespan - Cost reduction

  • Other surface treatment equipment
  • Processing Contract
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Effects of Fluoropolymer Coating for Pharmaceuticals

Effects of Fluoropolymer Coating for Pharmaceuticals

Introducing the effects of fluoropolymer coating in a YouTube video!

In the pharmaceutical industry, preventing foreign matter contamination and removing residues during drug manufacturing are important challenges. In particular, when highly adhesive substances adhere to manufacturing equipment, it can increase cleaning efforts and potentially reduce production efficiency. Fluoropolymer coatings provide excellent non-stick properties to address these challenges, contributing to improved product quality and productivity. 【Application Scenarios】 - Parts of pharmaceutical manufacturing equipment (mixers, filling machines, etc.) - Containers for reagents and raw materials - Areas where adhesion prevention is necessary 【Benefits of Implementation】 - Easier removal of residues, leading to reduced cleaning time - Reduced risk of foreign matter contamination - Improved production efficiency - Stabilization of product quality

  • Other surface treatment equipment
  • Processing Contract
  • Fluorine resin coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluorine resin coatingの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.